Sometimes the water you need to pump is not clean and is full of mud, sludge, sand or leaves. On these occasions, you need a pump capable of dealing with these particles and this hardwearing, hard working dirty-water pump from Loncin is the pump to watch out for.
It is ideal for garden pond or pool emptying, flood control, construction site work ditch draining, sewage and septic tank work. With a maximum lift of 30m* and a generous 45,000 litres per hour delivery volume, the Loncin LC80WB30-4.5Q 3" Dirty-Water Pump is lightweight enough to move around but sturdy and durable enough to keep working time after time.
Constructed from a strong aluminium alloy with its useful low weight and corrosion resistant properties, the body of the pump and its fuel tank is protected and stabilised by a sturdy powder-coated, steel frame.
The engine is a commercial grade, high quality Loncin G200F, 196cc, 5.5hp version with OHV (overhead valve) for smooth, reliable power, good fuel economy and lower emissions, part of Loncin's ongoing vision to reduce carbon emissions across the board without compromising on power.
All centrifugal pumps use centrifugal force to create a pressure differential in water, thus delivering the pumping action, but excess air can prevent the pump's efficiency. This pump is both centrifugal and self-priming, meaning that it can use the air-water mixture to achieve fully primed pumping action. In a self-priming pump, air does not reduce efficiency in the same way.
The centrifugal force in this model is created by a double-impeller, driving the fluid to its exit chamber, and the double-impeller is also made of aluminium for rust resistance.
All mechanical sealing is ceramic, high quality and resistant to corrosion, and the engine is protected from damage by a special low oil safety device.
* The actual lift of a water pump = suction lift + discharge lift, and the water pump lift as stated is about 1.15 - 1.20 times of the actual water lifting height; so with a 30m lift pump you are looking at an actual lifting height of about 26m.
SAFETY WARNING: Never operate or activate this water pump in an enclosed or partly enclosed space, and always make sure there is adequate ventilation around the pump before operating.
- Compact, powerful, commercial grade centrifugal, self-priming clean water pump
- Reliable, durable commercial grade OHV engine for smooth, low emission power
- Centrifugal pump action with self-priming for reliability and efficiency
- Aluminium alloy constructed double-impeller
- Ceramic seals for corrosion and wear resistance
- Steel safety frame to protect engine and fuel tank and stabilise pump
- Easy recoil start for reliability
Engine Type Petrol 4-stroke Engine Power 5.5HP/4.1kW Engine Capacity 196cc Flow Rate (Max.) 45,000LPH Maximum Head 30m Suction Head 6m Delivery Diameter 8cm Suction Diameter 8cm Dimensions (HxWxL) 44cm x 48 x 59
Customer Reviews 1 item(s)
So far seems to be a great piece of kit
Review by Fenland Horticulture / (Posted on 03/05/2014)
So far seems to be a great piece of kitReview by Fenland Horticulture / (Posted on 03/05/2014)Ordered Friday, recieved on the Monday! First impressions were very good upon taking out of the box. Used on the Tuesday. A beast of a pump! Started so easily.
Bit disappointed to find the pump needs filling with water first as I thought that being a self-priming unit it would literally be 'plug and play'.
For the pond I used it to drain I barely needed to up the revs from tick-over.
All in all so far so good! Fingers crossed it continues to perform well. The 2yr guarantee however is reassuring.
Ease of Use
- So far seems to be a great piece of kit