
For the easy and accurate application of total or selective weedkillers,
fungicides, fertilisers and pesticides to all turf/grass areas, paddocks, pathways
and drives. There are no motors or engines, only a simple, wheel driven gearbox
- ensuring easy operation. Simply push the machine to spray - stop pushing and
spraying will cease. 5 specially designed models are available for different
terrain and capacity requirements.
18" Gardener
Approximately 10 mins to deliver one full
tank equivalent to 1.25 hours per acre. This model is very popular with the
owner of an average garden with a treatment area of 150 square yards per filling.
The machine sprays low to the ground. The rear wheels provide balance and enable
the machine to be manoeuvred without spraying.
24"
Groundsman |
36" Professional
Approximately 12 minutes to deliver one
tank at steady walking speed as in mowing. Equivalent to approximately 72 minutes
per acre. This elite sprayer is designed and built for the professional user
for the accurate treatment of large areas of fine turf, such as bowling greens,
cricket squares, golf greens and tennis courts.
72" Fieldmaster
Approximately 10 minutes to deliver one
full tank at an operating speed of 4mph equivalent to 35 minutes per acre. This
towed model is designed for coverage of large paddocks, golf courses, sportsfields
and use on large estates. It is the largest model in the range and is capable
of treating up to 5 hectares in a working day at approximately 4 mph.
40" Paddockmaster
Approximately 15 minutes to deliver one
full tank equivalent to 1.75 hours per acre. Working on a wheel barrow design,
this machine with its one pneumatic tyre is capable of covering rough ground
and gravel with greater ease than any two wheeled model. Ideal for paddocks,
embankments, rough verges, headlands etc..., this sprayer if very popular with
local Authorities and Contractors.
The entire range of walkover sprayers operate
on the same principle. A gear pump driven by one or more of the land wheels
ensures that the liquid fed to it under gravity from the tank is delivered through
nozzles at an accurate, pre-calibrated rate. The only pressurised area within
the mechanism is that from the pump to the nozzles.